CB Serie

Frames for residual pumps.

Category:

Description

Control panels for 2, 3 or 4 residual pumps up to 45 kW.

  • Power supply 3-400V 50Hz. 60Hz.
  • Power supply relay in 0.37 to 4 kW panels.
  • Micro-automaton 16 inputs / 10 outputs for panels from 5 to 45 kW.
  • Soft starter with pump for panels from 5 to 45 kW.
  • Externally operated general cut-off switch.
  • General magneto-thermal and differential (300mA) switches.
  • Magnetothermic switch per pump.
  • Ammeter per pump visible from the outside.
  • Voltmeter with phase selector visible from the outside.
  • Operating hours counter visible from the outside.
  • “Manual-Stop-Automatic” Selectors.
  • Pilots who detect:
      • Presence of voltage
      • Pump operation
      • General Judgment
  • Acoustic alarm.
  • Take inner Schuko.
  • IP65 protection electrical cabinet made up of self-supporting metal modules.
  • Boards designed for use with switches and level probes.

On request:

  • GSM communication for remote control and monitoring of parameters.
  1. For power ratings from 0.37 to 4 kW. In the case of an alternating relay, a circular permutation is possible (cascade pump operation).
  2. For power ratings from 5 to 45 kW. a micro-automaton manages the circular permutation of the pumps, allowing the user to select the following operating modes:
    • 1+1 mode : 2 pumps running in rotation
    • Mode 2 : 2 pumps running in rotation and married.
    • Mode 3 : 3 pumps running in rotation, maximum 2 in cascade.
    • 3+1 mode : 4 pumps running in rotation, maximum 3 in cascade.
    • Mode 4 : 4 pumps running in rotation and cascade.
Certificados

Call us

Send us an email